Vegetable seeds before sowing process

Although some wild vegetables have obvious wild characters, strong adaptability, and rapid and easy germination, most of the dilute special vegetables still need to be seeded before sowing, so that germination and emergence will be neat and tidy, and it is easy to maintain the whole seedlings and reduce the management of seedlings. .

(I) Soaking Most of the seeds should be soaked before sowing and germination to fully satisfy the moisture needed for the germination of the seeds. Soaking time and water temperature vary depending on the type. The thickness of the seed coat is different from that of water absorption. Soaking time should be appropriate, too short, lack of water absorption of seeds, can not achieve the purpose of soaking; too long, it will lead to extravasation of nutrients within the seed, and even cause the seed to suffocate death. Soaking water temperature is generally 30 ~ 40 °C. The asparagus seed skin is thick and hard, and the water absorption is difficult. The soaking takes 3 days and nights; the bitter gourd seeds must first be soaked in a warm soup at 55-60° C. for 30 minutes and then soaked in 30° C. water for 4-8 hours. Broccoli and other cruciferous vegetables, such as broccoli, do not generally need to be soaked. If soaked, they should not exceed 2 hours. After soaking, wash the impurities and attachments on the outside of the seeds and then germinate.

(b) Germination Seeds require a certain temperature, humidity, and air conditions during germination. In the cultivation, the germination process should be carried out in order for the seed to emerge quickly. Germination should pay full attention to meet the above three conditions. The origin of various rare vegetables is different, and the required germination conditions are also very different. General cold resistance of rare vegetables such as root celery, burdock and other suitable temperature for germination 15 ~ 20 °C, less than 15 °C germination is slow, poor uniformity; higher than 25 °C, the germination rate decreased significantly. The proper temperature for sprouting of the cabbage is 20-25°C. Bitter gourd, winged bean and other thermophilic vegetables have higher germinating temperature and the optimum temperature is 25-30 °C. During the germination process, especially in the winter and spring cold seasons, adequate temperature conditions should be maintained. It is generally best to germinate in an Incubator.

During germination, water should be sprayed every day as appropriate to maintain the moisture level of the seeds and not to make the buds dry to death. At the same time, it should be turned frequently to promote air circulation.

Many rare vegetables sprout for a long time and the buds are not neat. For example, asparagus takes 10 days and bitter gourd takes 3 to 4 days. When germination, about 50% of the seeds germinate and should be sown. Do not wait until the buds of the early buds are too long and affect the emergence.

(3) Dilute special vegetables with severe pests and diseases at seedling stage should be disinfected before sowing. In order to prevent the occurrence of damping-off during the seedling stage, carbendazim soaking or seed dressing can be used before sowing.

Drying Oven

Our drying oven quality is very good, the cabinet is made of high quality cold-rolled steel plate by punching, surface spray treatment . The inner is made of high-quality steel plate or stainless steel liner plate.It is easy for users to choose. Between the inner and the shell filled with high quality rock wool for insulation. Door is equipped with a liquid crystal display screen and operating buttons.If you need drying oven ,pls contact us.


Technical data:


model Voltage Rated power Wave degree of temperature Range of temperature Workroom size overall dimension number of shelves
(V) (KW) (℃) (℃) (mm) (mm)
101-0AS 220V/50HZ 2.6 ±2 RT+10~300 350*350*350 557*717*685 2
101-0ABS
101-1AS 220V/50HZ 3 ±2 RT+10~300 350*450*450 557*817*785 2
101-1ABS
101-2AS 220V/50HZ 3.3 ±2 RT+10~300 450*550*550 657*917*885 2
101-2ABS
101-3AS 220V/50HZ 4 ±2 RT+10~300 500*600*750 717*967*1125 2
101-3ABS
101-4AS 380V/50HZ 8 ±2 RT+10~300 800*800*1000 1300*1240*1420 2
101-4ABS
101-5AS 380V/50HZ 12 ±5 RT+10~300 1200*1000*1000 1500*1330*1550 2
101-5ABS
101-6AS 380V/50HZ 17 ±5 RT+10~300 1500*1000*1000 2330*1300*1150 2
101-6ABS
101-7AS 380V/50HZ 32 ±5 RT+10~300 1800*2000*2000 2650*2300*2550 2
101-7ABS
101-8AS 380V/50HZ 48 ±5 RT+10~300 2000*2200*2500 2850*2500*3050 2
101-8ABS
101-9AS 380V/50HZ 60 ±5 RT+10~300 2000*2500*3000 2850*2800*3550 2
101-9ABS
101-10AS 380V/50HZ 74 ±5 RT+10~300 2000*3000*4000 2850*3300*4550 2
101-10ABS
drying ovendrying ovendrying oven

Factory photos:


drying oven

drying oven

Drying Oven,Hot Air Oven,Laboratory Drying Oven ,Vacuum Drying Oven

Cangzhou Blue Beauty Lab Instrument Co., Ltd. , https://www.czlabinstrument.com

Posted on