Cautions when using the submachine

The advantage of subsoiler is that it is consistent with the depth of plowing, deep without turning, can break the plow bottom layer without destroying the soil tillage layer, and can be double-operated, and the operation cost is low.

The precautions for using the submersible machine are as follows:

1. A deep-seated machine must have someone responsible for maintenance and use, be familiar with the performance of the subsonic machine, understand the structure of the machine and the adjustment methods and use of each operating point.

2. Prior to the work of subsoiler, it is necessary to inspect the bolts of each part, and no loosening phenomenon is allowed. Check all parts of grease, not enough time to add. Check the wear of the wearing parts.

3, deep loose operation, to make the deep loose spacing distance consistent. The operation should be kept in a straight line at a constant speed.

4. During the operation, it should be ensured that it is not heavy, loose, or dragged.

5, the operation should be checked at any time during the operation, found that the machine should be cleared in time.

6. If abnormal noise occurs during the operation of the machine, stop the operation in time and continue to perform the operation after finding out the cause.

7. When the machine is working, if you find that there is a situation where there is a sudden increase in stiffness and resistance, immediately stop the operation and eliminate the bad condition before proceeding.

8. In order to ensure the service life of the subsea machine, it should be carried out slowly when the machine is inserted into the earth and unearthed. Do not force it to operate.

9, equipment operation for a period of time, should conduct a comprehensive inspection and found that the fault repair.

Posted on