Precautions for adding heat transfer oil (electric heating heat transfer oil sandwich pot)

1. Before installing the heat transfer oil sandwich pot, assemble the fueling funnel to the equipment. Do not cover the fueling funnel during work, and safely operate to prevent danger.

Note: Fill the heat transfer oil to the equipment overflow before working.

The oil filling port must be open during operation and the overflow port is closed!!

Heat transfer oil model: 350# (national standard manufacturer)

Second, the heat transfer oil sandwich pot electric heating tube instructions

1. Main parameters and specifications of electric heating pipe

Name: Electric heating tube

Power: 380V 50HZ

2, equipment installation precautions

1) Check if the electric heating tube is grounded and the power cord is damaged in the no-power condition.

2) Check the circuit and make sure the mating is properly connected and all switches are in the off position;

3, heat transfer oil sandwich pot debugging precautions

1) Add appropriate amount of heat transfer oil, do not add too much to prevent the heat transfer oil from overflowing, and the oil fill port must be open during operation.

2) Turn on the power switch and pay attention to the running status of the equipment;

3) Pay attention to the position of the heat transfer oil in the oil filling port during the process of turning the pan to prevent it from flowing out.

4) If any abnormality occurs during the work, please cut off the power immediately and check again;

5) The electric heating tube needs to be cleaned once every 3 months.

?