The center of the brush is aligned and the two sides are symmetrical. The brush is perpendicular to the surface of the container. The overlapping gap of the brushing sweeping container is: a single pressing brush is 10 mm to 15 mm, and the combined pressing brush is 5 mm to 10 mm. The position of the cleaning brush from the sponge is 1 mm to 2 mm. Adjustment of the bottle head. The bottle head should be 20mm lower than the bottle when there is no bottle.
2. Adjustment of the label box:
The center line of the standard box, the center axis of the standard station is tangent to the label paper, and the center axis of the target board is lined up at three points. The adjustment target board is tangent to the label paper (0 distance), and then the standard box is moved closer to 1 mm to 2 mm. The gap between the standard paper and the bead on both sides should be between 0.8mm and 1mm. The gap is too large, causing the standard paper to shift in the standard box, and the oblique mark appears. If the gap is too small, the push mark will be poor. The adjustment of the position of the labeling hook of the standard box: the upper and lower and the left and right grasping hooks are on the same vertical plane and evenly work on the standard paper, so that the label can be smoothly captured. Adjustment of the label supply roller: When there is no label, the label platen can be pressed to the front end of the label box and the label near the label hook finger cannot be crushed.
3. Adjustment of the bottle star wheel, the bottle star wheel, and the bottle screw:
When adjusting the inlet and outlet star wheels and the feeding screw, the pressure head of the labeling machine shall prevail. First adjust the bottle into the star wheel. When the bottle head just overwhelm the bottle, adjust the bottle into the star wheel so that the bottle is in the middle of the star wheel groove. Adjustment of the inlet screw: According to the inlet star wheel, when the bottle is in the middle of the groove of the inlet star wheel, adjust the auger so that the auger is pressed against the bottle side without displacement. Adjustment of the bottle star wheel: When the bottle head has just been lifted, adjust the star wheel so that the bottle is in the middle of the groove of the star wheel.
4. Adjustment of the standard station:
Adjustment of the squeegee and the rubber roller: The squeegee and the rubber roller should not have a gap over the entire length. If there is a gap, the squeegee can be adjusted by adjusting the eccentric bolt. Adjustment of the rubber roller and the target plate: the target plate and the rubber roller only contact each other without any pressure. If the gap is too large, the glue on the label will be too much, causing the glue. The gap is too small, the contact is too tight, the glue will be squeezed away, and there is no glue on the half of the target. Practice has proved that the gap between the target plate and the rubber roller is between 0.1mm and 0.2mm. This can be achieved by adjusting the bearing housing in the lower part of the rubber roller and adjusting the bearing on the upper part of the rubber roller if necessary.
Refillable Vape Pod System Kit
The AKSO pod system is not only looks great but it's a wonderful kit for vapers who want the option of empty refillable pods. The vape pod kit itself comes with one vape device and one blank (empty) cartridge 1.4ml capacity that give you the freedom of flavorate juice option.
The device is equipped with a built-in 420mAh rechargeable battery for vaping all day, the battery charges with a USB charging cable
The pod adopts cotton coil, deliver the purest taste, and the innovative "n" cotton wicking structure let you never have to worry about spilled vape juice when you're out on the go.
With The Akso vape Pod System Kit, vaping experience is super simple. Just take a cartridge out of the packaging, fill with your flavorate e-liquid and pop into the device. Then simply inhale and you're vaping. No buttons to press making it one of the best draw activated pod vape.
The feature of AKSO Portable Pod Vaping System:
1, 420mAh rechargeable device and 1.4ml Refillable Pod
2, LED light battery indicator: Blue: ≥ 3.94V(75%), Green: 3.75V~3.93V(74%-31%), Red: ≤3.74V (30%)
3, Ultra portable pod kit with buckle locking system
4, Advanced XT Chip with multiple safety protections: low voltage protetion, over charge protection, 10 seconds cut-off protection, short circuit protection, over temperature protection.
5, 6W, 3.6V constant output
5, Innovative "n" cotton wicking structure
7, U-shape structure on the top interior
Custom Vape Cartridge,Pod Vape Pen,Vape Pen Rechargeable,Refillable Vape Pens,Vape Battery Rechargeable
Shenzhen Axiswell Technology Co., Ltd , https://www.medhealthycare.com